Shandong Weifang nylon renewable materials supply manufacturers Which is stronger? To find Weifang ZTE ZTE nylon nylon renewable materials Ltd. Weifang renewable materials Ltd. offers a variety of nylon 6 and nylon 66 recycled materials, renewable particles nylon, reinforced nylon and other products. Nylon 6 and nylon 66 appearance close to the physical properties are also very close. Appearance is generally presented as a horny, toughness, surface brightness, white or slightly yellow, transparent or translucent crystalline resin, it is easy to be in a different color, nylon recycled materials may be slightly darker color. Most nylon molecular weight of about 1.5-3 million. They had a density of 1.14-1.15g / cm3. Tensile strength:> 60.0Mpa. Elongation:> 30%. Bending strength: 90.0Mpa. Notched impact strength> 5 (KJ / m2). Nylon shrinkage rate of 1% to 2%. Moisture will change size after molding. Water absorption of 100% nylon material, the relative moisture saturation can absorb 8% using a wide temperature between -40 ~ 105 ℃. Because of the temperature and the moisture content can significantly affect the mechanical properties of PA, so adding fiberglass compressive and tensile nylon material temperature performance will be greatly enhanced. Nylon 66 and nylon 6 features are slightly different. Slightly elastic nylon 66, nylon 6 melting point higher than, lower than nylon 6 dyeability. Therefore synthetic nylon renewable materials also have similar performance. Hygroscopic large nylon renewable materials, nylon renewable materials with high melt viscosity and shear sensitive temperature-sensitive, low melt viscosity, good fluidity. Poor thermal stability in the molten state at high temperature decomposition. Generated by crystal forming process, a large shrinkage. Weifang ZTE nylon renewable materials, Ltd. specializes in nylon renewable materials, nylon material particles renewable particles nylon and other products, welcome to buy, sales hotline: 15866116667 Website: http: //www.sdnlzsl.com/